Wall Construction:
A. 2x4" kiln dried double top plates
B. 4 x 8' 1/2" O.S.B.
C. 2x4" treated bottom plates
D. 2x4" 24" o.c. gable end braces
E. 1x4" #2 pine notched in sway braces
F. 2x4" 16" o.c. studs, machine stress rated
G. 2x6" Douglas fir 48" o.c. collar ties

Rafters:
H. 2x6" / 2/8" Select structural grade 
     Douglas fir 16" o.c.

Ridge Board:
I. 1x8" #2 pine / 2x8" Douglas fir 

 

 Overhangs:
J. Plywood or Aluminum
K. 1x4" #2 pine sub facia
L. 1x6" #2 pine fascia
M. 12" side overhangs
N. 1x6" #2 pine fascia on all rake ends

Roof Boards:
O. 4x8' 1/2 O.S.B.

Roofing:
P. 15 lb. felt underlayment
Q. Fiberglass or asphalt 25 year shingles

Siding:
R. Siding-various styles and patterns

Slab:

  • 6x6"' #10 wire mesh inset throughout slab

  • 4" thickness in center of slab

  • 3-1/2" high curbing on both sides

  • 3-1/2" pitch, to front for drainage

  • Stress joints scored into sections, sprayed 
    with a water proofing and concrete curing agent

 

Concrete:

  • 6 bag mix, low chert, for all concrete work

  • #5 reinforcement rod all throughout perimeter

  • 5" wide curb around all three sides

  • 12x12" thickness at perimeter of slab

  • 1/2" anchor bolts every 5-6 feet

 Fill: 5" of Traffic Bond compacted

 

 

Also Included:

  • ALL LUMBER IS SELECT STRUCTURAL TOP GRADE

  • 2x4" upper collar ties 24" o.c.

  • 1x8" collar tie hangers 48" o.c.

  • Headers, Microlam Overhead Door

  • Two 2x6" Douglas fir headers above service entrance

  • Two 2x6" Douglas fir headers above all windows

  • Various overhead door styles and sizes

  • 32" x 6'8" Steel raised panel service door and lockset

  • Aluminum service door threshold

  • H-clips on 24" o.c. spanned rafters

  • 1/2" shingle strip on all rake ends